Rapid Prototype Logo Rapid Prototype Company

Your First Choice for
SLA™, SLS™ and Cast Urethane Parts!
GLASS-FILLED NYLON

For SLS® parts requiring improved stiffness.
Glass-Filled Nylon Blower Wheel
  • Reinforced with glass beads.
     
  • Improved heat resistance.
     
  • Better chemical resistance.

Mechanical Properties


Measurement Test Method Value
Tensile Strength @ Yield ASTM D638 2,800 MPa (19.3 psi)
Flexural Modulus ASTM D790 413,000 Mpa (2847psi)
Impact Strength - Notched Izod ASTM D256 53 J/m (1.0 ft-lb/in)
Impact Strength - Unnotched ASTM D257 443 J/m (8.3 ft-lb/in)
Shore D Hardness @ 25° C ASTM D2240 66
Seller makes no representation, express or implied, including the merchantability or fitness to a particular purpose.  No statements herein are to be construed as inducements to infringe any relative patent.  Under no circumstances shall seller be liable for incidental, consequential or indirect damage for alleged negligence, breach of warranty, strict liability, tort, or contract arising in connection with the product(s).  Buyer's sole remedy and seller's sole liability for any claims shall be buyer's purchase price.  Data and results are based on controlled or lab work and must be confirmed by buyer by testing for its intended conditions of use.  The product(s) has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin or blood is intended or for uses for which implantation within the human body is intended.
Copyright © 2011 - Rapid Prototype Company.     All rights reserved.      All trademarks and logos shown are the property of their respective owners.
4141 N. Atlantic Boulevard, Auburn Hills, Michigan 48326
Phone:  (248) 391-6600     Fax:  (248) 393-8430     E-mail:  rapid@rpparts.com