Rapid Prototype Logo Rapid Prototype Company

Your First Choice for
SLA™, SLS™ and Cast Urethane Parts!
FINE NYLON

For SLS® parts requiring durability & fine detail.
Fine Nylon Buckle
  • Chemical resistance.
     
  • Excellent for living hinges.
     
  • Snap-together parts.
     
  • Heat Resistant.
     

Mechanical Properties


Measurement Test Method Value
Tensile Strength @ Yield ASTM D638 5,200 MPa (36 psi)
Tensile Modulus ASTM D639 202,000 MPa (14,000 psi)
Tensile Elongation at Break ASTM D640 32%
Flexural Modulus ASTM D790 126,000 Mpa (870 psi)
Impact Strength - Notched Izod ASTM D256 70 J/m (1.3 ft-lb/in)
Impact Strength - Unnotched ASTM D257 1370 J/m (25.7 ft-lb/in)
Seller makes no representation, express or implied, including the merchantability or fitness to a particular purpose.  No statements herein are to be construed as inducements to infringe any relative patent.  Under no circumstances shall seller be liable for incidental, consequential or indirect damage for alleged negligence, breach of warranty, strict liability, tort, or contract arising in connection with the product(s).  Buyer's sole remedy and seller's sole liability for any claims shall be buyer's purchase price.  Data and results are based on controlled or lab work and must be confirmed by buyer by testing for its intended conditions of use.  The product(s) has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin or blood is intended or for uses for which implantation within the human body is intended.
Copyright © 2011 - Rapid Prototype Company.     All rights reserved.      All trademarks and logos shown are the property of their respective owners.
4141 N. Atlantic Boulevard, Auburn Hills, Michigan 48326
Phone:  (248) 391-6600     Fax:  (248) 393-8430     E-mail:  rapid@rpparts.com